When Do You Need to Replace Garage Door Springs?
To replace garage door springs, you must first understand what to look for. There are different types: extension springs, torsion springs, and open-looped extension springs. The proper tools and the proper number of turns are essential. Extension springs run horizontally along the track. It is not as difficult to replace these springs as torsion springs.
Signs of failure of torsion springs
There are a few common signs of torsion spring failure that you may notice in your garage door. If the door isn’t moving properly, you may be experiencing a jerk or a loud snapping noise. In such cases, you should call a professional to assess the situation and perform a garage door spring replacement Austin if necessary. To prevent this from happening, check your garage door regularly and avoid attempting to repair it yourself.
During your monthly checkup, you should check the condition of your garage door torsion springs. Torsion springs have a long lifespan, ranging from seven to nine years, depending on the door type and how much it’s used. If you notice any gaps between the coils of the springs, it’s time to replace them. In general, you should replace your garage door torsion springs when the following symptoms occur:
Poor maintenance: You should inspect your garage door torsion springs at least once a year for signs of wear and tear. If you notice rust, spring is likely to fail. If you see rust or corrosion, replace it as soon as possible. Corrosion is one of the most common causes of a torsion spring failure, and if you notice it, call a professional immediately.
Signs of failure of extension springs
One of the most common signs of a failing garage door extension spring is rust. If the springs are older than ten years, they are likely too old and may have reached the end of their recommended lifespan. Broken springs can prevent entry into the garage or can cause the door to fall over if it’s not fixed in time. You can address the issue yourself by applying lubricant to the springs. However, repairing the issue yourself may lead to worsening the issue.
Another sign of spring failure is uneven or misaligned garage doors. Broken spring clips or excessive pressure may also be responsible for a broken spring. If the springs aren’t functioning properly, it’s time to replace them. If the springs are rusting or deteriorating, they’re not repairable. If the springs are worn, and you can’t open or close your garage door, contact a garage door repair Austin, TX expert to inspect the situation and determine if you need new springs.
Broken springs are the most common cause of garage door malfunctions. A broken spring will make your door unsafe and even cause you to fall. It may be a temporary solution if you lubricate the springs regularly, but the door might need to be repaired if the springs aren’t lubricated. In addition, broken springs may be prone to further damage, so it’s important to inspect your garage door springs regularly.
Signs of failure of open-looped extension springs
An open-looped extension spring may not work as it should. If it is sagging, the spring is likely fatigued. You can try shortening the cable, but you should note that the spring might need to be replaced. One reliable method is to thread the cable through the cable clip. If the spring is too long, you can also try to lift it over the track.
Torsion springs can last anywhere from four to nine years, depending on their use and condition. Extension springs, however, have a shorter lifespan, usually between four and nine years. These springs also do not produce as much tension as torsion springs, and the gap in the spring coils is a clear sign that the steel has given way. When this happens, the spring will no longer be able to produce the necessary lifting force.
When replacing extension springs, remember that they have varying strengths and should be bought according to the garage door’s weight. People often buy the largest spring that they can find at a home improvement store, but bigger is not necessarily better. For example, a 100-pound door needs two springs of equal strength. If you buy a spring that is too large, your door will fly up when opened or may be difficult to close. It will increase the chances of a spring breaking; it will also stress your springs, resulting in additional repairs.